need advice
Discussion in Striping & Marking started by AC (unclaimed legacy handle), Jan 11, 2006. 10 replies, last reply Jan 12, 2006.
AC, I would say no but that would depend on how picky you are regarding the finish. If you have a multi-color clunker of a truck that you just want to have uniform color coat and are not very particular about appearance, then sure it sprays paint and it could be used. Think of airless as a tool that puts on a heavy "protective" coat. External mix air spray (auto body style gun) is used to "enhance" a finish with multiple thin and fine coats. Graco makes a green AL tip that is called a fine finish tip that applies paint very differently than a striping tip. These tip are used for painting metal doors, lockers and even work exceptionally well with Lacquers and other thin and fine coatings. Striping tips a designed to apply very heavy edges to the pattern while the green tips have very light or faint edges. This is done so that you do not have obvious overlaps, or "banding" on the finished surface. Having a non- porous surface like metal only accentuates the problem. The black tips deliver a finish somewhere between the two. So if you are looking for an automotive finish get an HVLP or external mix conventional air gun, and forget airless.
This archived thread is closed to replies.
Members can pick it up in the member forum: a new thread that quotes this one and links back here.
Continue this discussion
Continuing the archived discussion need advice. Your thread opens in the member forum and links back to it.
PLSIC members start threads here. It is free for striping contractors and property owners; the panel beside this page has the two ways to join.
From the Parking Lot Planet archive, 2005 to 2016. About this archive Report a post