Titan Powerliner Stripers

Mike, the left rear is best. On reason is the location of the outlets on the bead dispenser. When a dispenser is used on the right front location (traditional location) the bead hopper outlets are located at the right front corner of the dispenser and should flow directly into the dispensers. If you move the guns to the right rear the bead flow starts at the right front and has to move to the back of the machine. When you move the guns to the left rear and then turn the dispenser 180 degrees the hopper outlets are perfectly located to drop directly into the dispensers. For roadwork this left rear location is also best because when striping you are in not striping in the oncoming lane.

This ensures beautiful transitions in turns..... flowing radius work and the ability to do straighter lines what poetry cormac you dark horse you!

Wendy, wow your right. Maybe I am the next Faulkner, Fitzgerald, or Fowles. Then again, maybe not.

e-willie, why not e mail me to discuss what issues you have had. Perhaps there have been some field service issues (lack of diagnostic capability). Also give me your S/N

Cormac, I'll email you the information on the machine we're having trouble with. It keeps burning circut boards. Thanks again for everyones help. Earnest

e-willie, I have to say that most Linelazers with multiple board replacements and even board replacements period is not the board. So if these were diagnosed correctly you would not be in this position. If it is a Linelazer 3's it is normally the connector behind the box that makes intermittent pin connections. Can be fixed within 2 minutes.