Wanted; Used airless Kelly Creswell power pro

Looking for a used Kelly power pro

I am always looking for parts for these beasts, so I wish you luck Mine has a 3500 pump and 4hp honda

Kelly Creswell is usually really good about having parts for their machines. I just can't justify purchasing a new one right now.

The biggest problem is that some parts are hard to come by so they are usually expensive, for example the pressure control box is really expensive even used, the good thing is that most of the replacement pump parts are graco

im going to retire my 3500 this season, 21 years old with original engine.

me too. mine is a 96 model and still runs great. I will probally part it out. It has a updated, expensive pressure controller that makes a far better machine out of them. the only reason I like the newer machines better is you don't have to remove the brake to install a driver hitch.

Milt I have two 3500 and they both do not have a brake on them, so was this an extra feature from graco you had to order or did you create one yourself ? I have seen the brake feature on the bigger graco's but never on the 3500's

Mine was factory, came on the machine new. I no longer have it as had to remove for the hitch. The kit no was 235-456. If I deciede to part this out, you might be interested. Has everything but the pump including almost new pressure controller. Also have the oem manual.

I didn't know that graco still sold those pressure control boxes, the last time I called the techline they told me I had to buy the $700 conversion kit to replace my unit but a buddy of mine told me to try and bend those tubes just a little bit with my fingers when my box was giving me problems. So I had the engine running and pump switch on and bent the tubes just a little bit in an upward motion and pump started pumping again. I don't know how long this trick will last. Also my box doesn't mount like they do on the graco frames, mine mounts up on top by the gun trigger and the mount is on the back of box, not like the one on the graco frames. https://www.dropbox.com/s/sub2zjp1iwt1fgb/2014-03-30%2015…

Milt, Whereabouts in Colorado do you live ? I would be possibly interested in the whole machine for parts but depending on shipping costs -vs- driving to pick it up in person from south east arizona.

small town striping wrote on Feb 22, 2015:Go to #10

Milt, Whereabouts in Colorado do you live ? I would be possibly interested in the whole machine for parts but depending on shipping costs -vs- driving to pick it up in person from south east arizona.

I live 80 miles East of Grand Junction right on interstate 70. Your pump should fit right on this machine. I will know in a week or two if I will be parting with it.

Go visit Milt. I did. He has a lot of useful advice so the trip would be worth it for that alone. Plus... it's goshed danged beautiful there.

I've got one for sale call if interested [phone removed]